Your cart is empty
Continue shoppingWater beading, gloss, long-lasting effect & easy application.
Das FINAL PRO guarantees you not only tested and safe ingredients but also maximum performance – from surface smoothness to intense shine to impressive hydrophobicity (water beading behavior).
Developed, manufactured & certified in Germany. FINAL PRO is your state-of-the-art ceramic sealant – for professional use!
Hazard-determining components for labeling
Signal word: DANGER
Warnings
Liquid and vapor highly flammable.
Harmful if swallowed.
Causes severe skin burns and serious eye damage.
Causes serious eye damage.
Can cause allergic skin reactions.
Can cause drowsiness and dizziness.
Harmful to aquatic organisms, with long-lasting effects.
Safety Instructions
P101 If medical advice is needed, have packaging or
label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames
and other ignition sources. No smoking.
P260 Do not breathe dust/fume/gas/mist/vapors/aerosol.
P264 After use, wash hands and face thoroughly.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/
face protection.
P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310 Immediately call POISON CONTROL CENTER/doctor.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Keep locked up.
P501 Content/container to an approved
Feed into waste disposal facility.
Safety data sheet available on request.
New Generation Ceramic Coating – Perfected in Germany
FINAL PRO offers you maximum quality in terms of performance, ingredients, and safety. It complies with all German and European regulations regarding ingredients, ensuring you a high level of product safety without compromise. For example, it is free from PTFE & PFAS.
Absolute top performance
Unsere Keramikversiegelung, das FINAL PRO bietet dir Performance auf einem sehr hohem Niveau, indem es herausragende Hydrophobie, Lackglätte und Glanz bietet. Besonders das Wasserabperlverhalten stand im Fokus unserer Entwicklungsarbeit, denn für viele Nutzer ist dieser Effekt von höchster Priorität. Damit vereinen wir in diesem Produkt modernste Technologie & aktuelle Richtlinien mit unserem jahrelangen know-how, was sowohl die Erwartung professioneller Fahrzeugpfleger als auch deren Kunden betrifft.
User-friendliness
Of course, we have also addressed user-friendliness. This is flawlessly ensured with the FINAL PRO. As long as all processing instructions are followed, an "effortless" application is possible. But beware! A ceramic sealant like the FINAL PRO is an absolute professional product – if there are any uncertainties regarding the application or if the spatial or technical conditions are not met, please contact a professional vehicle care/paint shop to have the product installed on your vehicle.
Package sizes: 50ml & 100ml | Product comes without applicators!
Processing
Die zu versiegelnden Lackoberflächen im Rahmen der standard Versiegelungs-Vorbereitung bearbeiten. (Reinigen, polieren etc.)
The pre-treated painted surfaces should be degreased with the "Ultra Degreaser".
Put a small amount of "Final PRO" into a suitable coating applicator and spread it over the paint surface.
The "Final PRO" should be "polished out" with our soft 300gsm microfiber cloths about 3-5 minutes after application. (without applying pressure)
Attention!The final surface smoothness only develops at the beginning of the drying phase, in the first hours after coating; this process can take up to 24 hours!
Control
Check the coated surfaces from different light angles for any "high-spots" (visible coating residues). You can remove these by gently wiping again with the microfiber cloth for up to a maximum of 10 minutes after application.
Drying phase(at approx. 20°C)
(Information may vary depending on climatic conditions!)
24 hours = Waterproof / Ready to drive*
5 days = fully cured./ Vehicle can be used and washed to full extent.
❗A more detailed guide can be found further down on this page⬇️
1️⃣ Who can process the Final Pro?
✅Professionals & Ambitious Enthusiastswith good basic knowledge in professional vehicle care
----------
2️⃣ For which surfaces can I use the ceramic coating?
WARNING: The following information requires correct processing!
✅All common automotive paints– (glossy & matte)
✅All types of painted rims
✅Wrapped Vehicles
✅Practically all common plastics– provides protection & color refreshment.
❌Not recommended for (soft) rubberlike seals
❌Not recommended for glass– here we recommend our special "Glass Coat"
💡Always test in an inconspicuous spot first!
----------
3️⃣ How do I need to prepare the paint?
Bullet Point Table:
✅Thorough hand wash execute
✅Paint decontamination:
Remove flash rust, tar, etc.with aCleaning Clay, to remove deep-seated dirt.
✅Polishing:
Falls der LackHolograms, scratches or swirlshat, it must be polished beforehand.
----------
4️⃣ What spatial requirements do I need?
✅Temperature range:Ideal are15–25°C, to ensure optimal processing & curing.✅Humidity 45-70% :Many people don't know this, but the right humidity is very important for the so-called polymerization (curing) to proceed ideally! 💡 You can often get a hygrometer to measure humidity for just a few euros.
✅Dust-free clean environment:a garage or hall is ideal.
✅Good lighting:LED spotlights or powerful workshop lamps help to immediately identify high spots (streaks).
✅Dry & weatherproof:After use, the car mayat least 12 hoursdo not get wet.
New generation ceramic sealing – perfected in Germany
FINAL PRO offers you maximum quality in terms of performance, ingredients, and safety. It complies with all German and European guidelines regarding ingredients, thus guaranteeing you high product safety without compromise. It is free of PTFE and PFAS, for example.
Absolute top performance
Our ceramic coating, FINAL PRO, offers you a very high level of performance, providing outstanding hydrophobicity, paint smoothness, and shine. Water-repellent properties were a particular focus of our development work, as this effect is a top priority for many users. This product combines the latest technology and current guidelines with our years of expertise, meeting the expectations of both professional car detailers and their customers.
User-friendliness
Of course, we also considered user-friendliness. FINAL PRO delivers this without a hitch. As long as all application instructions are followed, an effortless application is possible. But be careful! A ceramic sealant like FINAL PRO is a truly professional product. If you have any uncertainties regarding application or the spatial or technical requirements are not met, contact a professional vehicle care/paint shop to have the product installed on your vehicle.
Container sizes: 50ml & 100ml | Product comes without applicators!
New generation ceramic sealing – perfected in Germany
FINAL PRO offers you maximum quality in terms of performance, ingredients, and safety. It complies with all German and European guidelines regarding ingredients, thus guaranteeing you high product safety without compromise. It is free of PTFE and PFAS, for example.
Absolute top performance
Our ceramic coating, FINAL PRO, offers you a very high level of performance, providing outstanding hydrophobicity, paint smoothness, and shine. Water-repellent properties were a particular focus of our development work, as this effect is a top priority for many users. This product combines the latest technology and current guidelines with our years of expertise, meeting the expectations of both professional car detailers and their customers.
User-friendliness
Of course, we also considered user-friendliness. FINAL PRO delivers this without a hitch. As long as all application instructions are followed, an effortless application is possible. But be careful! A ceramic sealant like FINAL PRO is a truly professional product. If you have any uncertainties regarding application or the spatial or technical requirements are not met, contact a professional vehicle care/paint shop to have the product installed on your vehicle.
Container sizes: 50ml & 100ml | Product comes without applicators!
Our Final Pro ceramic sealant is developed, manufactured, and tested in Germany. The sealant complies with all current regulations & at the same time offersmaximum performance without compromise.
To emphasize this, we even had a DEKRA-accredited testing laboratory conduct several quality tests – with successful certification in multiple classifications.
Certification in various classifications, see:DEKRA Laboratory Test Report
Our Final Pro ceramic sealant is developed, manufactured, and tested in Germany. The sealant complies with all current regulations & at the same time offersmaximum performance without compromise.
To emphasize this, we even had a DEKRA-accredited testing laboratory conduct several quality tests – with successful certification in multiple classifications.
Certification in various classifications, see:DEKRA Laboratory Test Report
Please note that this is only a rough guide!
If you are not 100% sure how to handle the required tools, please always contact a professional.
Before use
Spatial claims
When applying our Final PRO, choose a well-ventilated, well-lit, dry, and clean area. Never apply on hot surfaces or in direct sunlight. Application temperature +15 to +25°C
Should an undesirable reaction with the surface occur during application, the coating process must be stopped immediately. The affected component can be "freed" of the uncured Final PRO coating by a final polishing step.
Before starting the coating process, a compatibility test on an inconspicuous area of the surface is mandatory!
processing
Treat the paint surfaces to be sealed as part of the standard sealing preparation (cleaning, polishing, etc.).
Degrease the pre-treated paint surfaces with the “Ultra Degreaser”.
Pour a small amount of “Final PRO” into a suitable coating applicator and spread it on the paint surface.
(Start with areas of no more than 60cmx60cm to get a feel for the processing.)
The "Final PRO" should be polished approximately 3 minutes after application with our soft 300gsm microfiber cloths (without applying pressure).
Caution! The final surface smoothness only occurs with the beginning of the drying phase, in the first few hours after coating; this process can take up to 12 hours!
Application
A small amount of "Final PRO" should be placed in the coating applicator and spread over the paint surface.
(Start with areas of approximately 60cmx60cm to get a feel for the processing.)
The "Final PRO" should be "polished out" after about 3-5 minutes using our soft 300gsm microfiber cloths (without applying pressure).
Attention!The final surface smoothness only develops at the beginning of the drying phase, in the first hours after coating; this process can take up to 24 hours!
control
Check the coated surfaces under different lighting angles for any "high spots" (visible coating residue). These can be removed by gently wiping with a microfiber cloth up to 10 minutes after application.
Drying phase
(at approx. 20°C)
(Information may vary depending on climatic conditions!)
12 hours = Waterproof/ Ready to ride*
5 days = Completely cured./ Vehicle can be fully used and washed.
✅Professionals & Ambitious Enthusiastswith good basic knowledge in professional vehicle care
WARNING: The following information requires correct processing!
✅All common automotive paints– (glossy & matte)
✅All types of painted rims
✅Wrapped Vehicles
✅Practically all common plastics– provides protection & color refreshment.
❌Not recommended for (soft) rubberlike seals
❌Not recommended for glass– here we recommend our special "Glass Coat"
💡Always test in an inconspicuous spot first!
Bullet Point Table:
✅Thorough hand wash execute
✅Paint decontamination:
Remove flash rust, tar, etc.with aCleaning Clay, to remove deep-seated dirt.
✅Polishing:
If the paintHolograms, scratches or swirlshat, it must be polished beforehand.
At least oneHigh gloss or one-step polishStep should be taken even if the paint is already in seemingly "good" condition.
✅Surface degreasing:
Before sealing, the surface must bea special degreaserlike ourUltra Degreasercleaned.
💡Tip:The sealant only holds as well as the preparation – the better the paint is prepared, the longer the protection lasts. Because only in this way can the sealant bond maximally to the pre-treated surface!
✅Temperature range:Ideal are15–25°C, to ensure optimal processing & curing.
✅Humidity 45-70% :Many people don't know this, but the right humidity is very important for the so-called polymerization (curing) to proceed ideally! 💡 You can often get a hygrometer to measure humidity for just a few euros.
✅Dust-free clean environment:a garage or hall is ideal.
✅Good lighting:LED spotlights or powerful workshop lamps help to immediately identify high spots (streaks).
✅Dry & weatherproof:After use, the car mayat least 12 hoursdo not get wet.
Developed with real experience
We are a German owner-managed brand. Founded and created out of genuine passion for premium car care! Led by our managing director and experienced professional detailer Tim Kohl, who still conducts workshops worldwide. His expertise goes into every product. All our chemical products are Made in Germany!
Made in Germany & Connected Worldwide
Whether at a trade fair or workshop in Dubai, the USA, or Europe – we are active internationally, but always there for you. Through Instagram, we take you behind the scenes, share our daily life, and are approachable. Over 1000 registered business customers on at least 3 continents rely on us!
🤝 For professionals & enthusiasts. For you.
Developed in practice for maximum performance, honest results, and easy application. We rigorously test every product and always strive to exceed all standards. As a German premium brand, we naturally comply with all regulations regarding chemicals and ingredients—your health is important to us.
I've been in the restoration business for 26 years, but I've never had a ceramic coating like this before. The shine and water-repellent effect are indescribable!
I have nothing but positive things to say about this ceramic sealant. It's very easy to apply, and the end results are fantastic.
The color has been refreshed and has a beautiful, deep, darker shade. It beads up very well.
Super workmanship and awesome look with a smooth surface
I can only recommend it
Keep it up 👏
The shine and smoothness is almost like that of the all-use graphene sealant, but the free graphene sealant is easier to work with than the Final Pro.
In the past, we have worked with the predecessor, the “Ultra Coat 2.0” from Safe Shield, for several years, which was also of high quality and had really excellent workmanship.
With the “Final Pro”, however, all the important screws of a coating were turned again.
The workmanship is again optimal, so that the coating can be applied and polished really well.
After curing, the level of gloss and depth of color is truly unique.
A big advantage over its predecessor is that the “Final Pro” in one layer easily exceeds the service life of two layers of “Ultra Coat”, thus significantly reducing the amount of material required in terms of ceramics.
Free shipping in DE from €89
Free shipping within Germany for orders over €89
Customer Service Mon.-Fri.
We answer your questions & concerns on weekdays between 9 AM and 4 PM promptly at:
info@safe-shield.eu
Top Rated
Unsere Kunden bewerten uns auf Trustpilot mit einem Score von 4.9 von 5.0
Secure payment guaranteed
Choose conveniently from various & secure payment options