New Generation Ceramic Coating – Perfected in Germany

FINAL PRO offers you maximum quality in terms of performance, ingredients, and safety. It complies with all German and European regulations regarding ingredients, ensuring you a high level of product safety without compromise. For example, it is free from PTFE & PFAS.

Absolute top performance

Unsere Keramikversiegelung, das FINAL PRO bietet dir Performance auf einem sehr hohem Niveau, indem es herausragende Hydrophobie, Lackglätte und Glanz bietet. Besonders das Wasserabperlverhalten stand im Fokus unserer Entwicklungsarbeit, denn für viele Nutzer ist dieser Effekt von höchster Priorität. Damit vereinen wir in diesem Produkt modernste Technologie & aktuelle Richtlinien mit unserem jahrelangen know-how, was sowohl die Erwartung professioneller Fahrzeugpfleger als auch deren Kunden betrifft.

User-friendliness

Of course, we have also addressed user-friendliness. This is flawlessly ensured with the FINAL PRO. As long as all processing instructions are followed, an "effortless" application is possible. But beware! A ceramic sealant like the FINAL PRO is an absolute professional product – if there are any uncertainties regarding the application or if the spatial or technical conditions are not met, please contact a professional vehicle care/paint shop to have the product installed on your vehicle.

Package sizes: 50ml & 100ml | Product comes without applicators!

Processing

Die zu versiegelnden Lackoberflächen im Rahmen der standard Versiegelungs-Vorbereitung bearbeiten. (Reinigen, polieren etc.)
The pre-treated painted surfaces should be degreased with the "Ultra Degreaser".
Put a small amount of "Final PRO" into a suitable coating applicator and spread it over the paint surface.

The "Final PRO" should be "polished out" with our soft 300gsm microfiber cloths about 3-5 minutes after application. (without applying pressure)
Attention!The final surface smoothness only develops at the beginning of the drying phase, in the first hours after coating; this process can take up to 24 hours!

Control

Check the coated surfaces from different light angles for any "high-spots" (visible coating residues). You can remove these by gently wiping again with the microfiber cloth for up to a maximum of 10 minutes after application.

Drying phase(at approx. 20°C)
(Information may vary depending on climatic conditions!)
24 hours = Waterproof / Ready to drive*
5 days = fully cured./ Vehicle can be used and washed to full extent.

❗A more detailed guide can be found further down on this page⬇️

1️⃣ Who can process the Final Pro?

✅Professionals & Ambitious Enthusiastswith good basic knowledge in professional vehicle care

----------
2️⃣ For which surfaces can I use the ceramic coating?
WARNING: The following information requires correct processing!

✅All common automotive paints– (glossy & matte)

✅All types of painted rims

✅Wrapped Vehicles

✅Practically all common plastics– provides protection & color refreshment.

❌Not recommended for (soft) rubberlike seals

❌Not recommended for glass– here we recommend our special "Glass Coat"

💡Always test in an inconspicuous spot first!

----------
3️⃣ How do I need to prepare the paint?
Bullet Point Table:

✅Thorough hand wash execute

✅Paint decontamination:

Remove flash rust, tar, etc.with aCleaning Clay, to remove deep-seated dirt.

✅Polishing:

Falls der LackHolograms, scratches or swirlshat, it must be polished beforehand.

----------
4️⃣ What spatial requirements do I need?
✅Temperature range:Ideal are15–25°C, to ensure optimal processing & curing.✅Humidity 45-70% :Many people don't know this, but the right humidity is very important for the so-called polymerization (curing) to proceed ideally! 💡 You can often get a hygrometer to measure humidity for just a few euros.

✅Dust-free clean environment:a garage or hall is ideal.

✅Good lighting:LED spotlights or powerful workshop lamps help to immediately identify high spots (streaks).

✅Dry & weatherproof:After use, the car mayat least 12 hoursdo not get wet.

✅Professionals & Ambitious Enthusiastswith good basic knowledge in professional vehicle care

WARNING: The following information requires correct processing!

✅All common automotive paints– (glossy & matte)

✅All types of painted rims

✅Wrapped Vehicles

✅Practically all common plastics– provides protection & color refreshment.

❌Not recommended for (soft) rubberlike seals

❌Not recommended for glass– here we recommend our special "Glass Coat"

💡Always test in an inconspicuous spot first!

Bullet Point Table:

✅Thorough hand wash execute

✅Paint decontamination:

Remove flash rust, tar, etc.with aCleaning Clay, to remove deep-seated dirt.

✅Polishing:

If the paintHolograms, scratches or swirlshat, it must be polished beforehand.

At least oneHigh gloss or one-step polishStep should be taken even if the paint is already in seemingly "good" condition.

✅Surface degreasing:

Before sealing, the surface must bea special degreaserlike ourUltra Degreasercleaned.

💡Tip:The sealant only holds as well as the preparation – the better the paint is prepared, the longer the protection lasts. Because only in this way can the sealant bond maximally to the pre-treated surface!

✅Temperature range:Ideal are15–25°C, to ensure optimal processing & curing.

✅Humidity 45-70% :Many people don't know this, but the right humidity is very important for the so-called polymerization (curing) to proceed ideally! 💡 You can often get a hygrometer to measure humidity for just a few euros.

✅Dust-free clean environment:a garage or hall is ideal.

✅Good lighting:LED spotlights or powerful workshop lamps help to immediately identify high spots (streaks).

✅Dry & weatherproof:After use, the car mayat least 12 hoursdo not get wet.